Autodesk Certified User (ACU) Practice Test

These questions are part of the practice quiz. Start practicing

• What best describes the Parent View in design?
• Which command would you use to create a straight line in AutoCAD?
• What modeling technique involves shaping organic bodies by manipulating a design's surfaces?
• What is a line of text that provides additional manufacturing details about a design called?
• What is a block in AutoCAD?
• What tool creates a transitional shape between two or more profiles or faces?
• What is the term for a round edge on a part or face within a design?
• What do Snap Points assist with in a design application?
• What view is used to shorten long parts with a lot of uniform geometry to conserve space on the drawing?
• What is a key aspect of the Parameter feature in design software?
• Which command would you use to create a copy of objects at a specified distance in AutoCAD?
• What is the function of the "EXPLODE" command?
• How do you freeze a layer in AutoCAD?
• What is the benefit of using the "BLOCK" command in AutoCAD?
• What tool is used to adjust the dimensions in a drawing in AutoCAD?
• What is the naming convention for a combination of parameters that defines the spacing or placement of sketch elements?
• What does the annotation line indicating an axis of symmetry refer to?
• Which assembly approach allows for separate editing of components in their dedicated files?
• What is the geometric representation used to denote the midpoint between two points called?
• What does the term "Dynamic Input" refer to in AutoCAD?
• Which tool is used to indicate faces on objects that touch but do not interfere with each other?
• What defines the specific values for the degrees of freedom in a 3D model's joint?
• What does "CTRL+Z" do in AutoCAD?
• What does the term "Annotation scaling" mean in AutoCAD?
• What is the purpose of a joint origin indicator?
• What term describes a state in which a part or component has all degrees of freedom removed in an assembly?
• How can the visibility of objects be controlled in AutoCAD?
• What do you call the feature that defines the radius of curvature of an edge within a design?
• What type of view provides a realistic representation of a final product?
• Which command is used to edit a block reference in AutoCAD?
• Which modeling method is best for creating interconnected parts that share common parameters?
• Which command displays a marker at the center of mass within a selected object?
• Which feature allows a 2D sketch to be transformed into a 3D model or body?
• How do you dimension a linear distance in AutoCAD?
• What term is used to describe the design file that Fusion 360 opens by default when starting anew?
• How do you start a new drawing in AutoCAD?
• What term describes a situation where two components are touching but not interfering with each other?
• What is the purpose of the "TRIM" command in AutoCAD?
• What does the command "DRAWORDER" do in AutoCAD?
• What does the "LAYER" command do in AutoCAD?
• Which command is used to rotate objects in AutoCAD?
• What does "Annotate" mean in AutoCAD?
• How can you lock a layer in AutoCAD?
• What is a Title Block in a drawing?
• What does "OSNAP" refer to in AutoCAD?
• Which tool detects collisions or interference between components?
• Which tool defines a motion between components using their current positions?
• What describes the amount of directional and rotational movement allowed for a part or component?
• How would you resize an object in AutoCAD?
• Which tool defines the positional relationship and motion between components?
• Which workspace allows the use of 2D sketch geometry to create solid, surface, or T-Spline models?
• Which command is essential for creating a duplicate of an object that is offset from its original position?
• What is the tool called that creates a new body from multiple selected bodies?
• What view represents an object in a 3D perspective typically from the top, front, and right side?
• What is the term for a flat-bottomed enlargement for a hole that allows the top of a fastener to be flush with the material's surface?
• Which modeling technique is primarily used to create complex organic shapes by manipulating vertices?
• Which type of drawing represents multiple 2D views of a 3D object?
• What is a Sketch in the context of CAD design?
• In CAD design, which view helps to visualize the cutting process of an object?
• What is the default view for a drawing in most design software?
• What is a Parameter in design software?
• What is the technical drawing used to communicate manufacturing information about an object?
• Which type of enlargement allows a tapered fastener to be flush with the material's surface?
• Which term refers to a menu that contains details about a design like material, volume, and mass?
• What is the primary function of a Shell tool in design software?
• What is the role of the "TRIM" command in AutoCAD?
• What kind of manipulation does Suppress allow for in CAD designs?
• In 3D modeling, which feature is used to create a flat object and then multiply it?
• What type of environment facilitates the creation of T-Spline bodies?
• What is the primary use of the Trim command in a sketch?
• Which tool allows the creation of a solid by sweeping a 2D profile along a path?
• What does the Project Browser display?
• Which command is used to generate a bill of materials in a drawing?
• Which term describes a flat angle along the edge of a part or between the edge and a specified face?
• What design approach allows multiple components to be dynamically related to one another?
• What is a punch-out in a 3D model typically used for?
• Which tool can be used to create symmetric shapes in a design?
• Which feature of a CAD system aids in the alignment of parts with angled edges?
• What are work planes that allow the construction of 2D sketches on complex 3D models referred to?
• How can you measure the distance between two points in AutoCAD?
• What does the Suppress feature do in a CAD environment?
• What command is used to create a connected sequence of line and arc segments in AutoCAD?
• What is the function of the "HATCH" command in AutoCAD?
• What is the main function of a Free Orbit tool?
• What is "Parametric Drawing" in AutoCAD?
• What type of view does the Section Analysis tool generate?
• What is the outcome of using a Mirror tool in a design?
• What assembly method involves creating individual components in their own design files?
• What are axes used for constructing references for creating sketches or features called?
• What method is characterized by having all components created within the same design?
• How do you create a rectangular shape quickly in AutoCAD?
• What is the default file type when creating a new design in Fusion 360?
• Which tool helps users navigate through preset views in a design?
• Which term refers to a design state where a part is fixed in place?
• In design software, what does the term "profile" typically refer to?
• What is the main difference between Model Space and Paper Space in AutoCAD?
• Which tool creates, joins, or removes volumes in a design?
• To change the properties of an object in AutoCAD, which command should you use?
• How do you insert an external reference (Xref) into a drawing?
• What does the "FILLET" command achieve in AutoCAD?
• Which command would you use to delete an object in AutoCAD?
• What is the term for a feature that specifies the geometry of parts in CAD?
• What is a Subassembly in CAD design?
• What does the manipulation tool enable in a design application?
• Which diagram showcases the relationship of components within an assembly?
• Which tool is used to create new bodies based on a selected face?
• Which tool is used to drag an icon to observe design changes?
• How can you measure an angle between two lines in AutoCAD?
• What is the use of the "CHPROP" command in AutoCAD?
• What is the term for a single bound structure that contains design elements in Fusion 360?
• How do you create a section view in AutoCAD?
• What function does the Extend command serve in a CAD environment?
• Which of the following is a 3D shape created from a 2D sketch using modeling features?
• What command would you use to create a ring around a circle in AutoCAD?
• What function does the "LAYER" command serve in AutoCAD?
• What is the purpose of the AutoCAD command "LINE"?
• What is the function of the "OFFSET" command in AutoCAD?
• What is the primary function of the Pattern tool in design software?
• What is the primary purpose of the "Undo" command in AutoCAD?
• Which command merges two or more objects into a single object in AutoCAD?
• What does an Orthographic View provide in terms of object representation?
• What is the function of the ViewCube in design software?
• How do layers benefit a drawing in AutoCAD?
• Annotations in an assembly primarily serve to provide what kind of information?
• What is the role of the "ARRAY" command in AutoCAD?
• What would be a proper use for the "HATCH" command in AutoCAD?
• What is the term used for a dark line drawn around the edge of a drawing sheet?
• What does the "3D Orbit" function allow you to do in AutoCAD?
• How can you preview a plot before printing in AutoCAD?
• What serves as a general term for various 3D modeling commands?
• Which tool allows for creating both assembly and detailing views in design software?
• What is the function of a Projected View in design software?
• Which tool allows the modification of selected geometry using commands like offset and fillet?
• What is a collection of components that have defined relationships with each other called?
• What component identifies the parameters of a design such as mass and surface area?
• In a design file, which action does the 'Align' tool primarily perform?
• What is the role of "Snaps" in AutoCAD?
• What method is typically used to delete an object in AutoCAD?
• Which function does the Loft tool primarily perform?
• What does the "OFFSET" command do in AutoCAD?
• How do you use the "SCALE" command in AutoCAD?
• How can you create a precise angle in AutoCAD?
• What is the difference between a viewport and model space in AutoCAD?
• What is the purpose of "PLOTTING" in AutoCAD?
• What is a view that creates an enlarged snapshot of all or a portion of another view?
• What is the "REGEN" command used for in AutoCAD?
• Which tool locks the current position of selected components?
• What do we call the defined measurements for pieces within a design or drawing?
• What is the line on a section view that indicates where an object will be cut?
• Which view shows the internal detail of a model?
• How do you access the Properties palette in AutoCAD?
• A 'Body' in 3D modeling refers to what element?
• Which tool is most suitable for understanding the layout and dimensions of a design?
• What is a "Viewport" in AutoCAD?
• In CAD techniques, which term best describes a sketch's capability to become a 3D object?
• What does a Thread represent in regard to design elements?
• What is the limitation on sketch elements used to create relationships between sketch elements known as?
• Which tool is used to place images on selected models of a 3D body?
• Which of the following is a feature that helps in organizing components within an assembly?
• What annotation indicates the location of the geometric center of a circle or arc?
• Which feature allows you to visualize parameters and work with flexible attributes in a model?
• Which tool is used to create symmetrical copies of objects in a design?
• What is the primary purpose of the "DIMSCALE" command in AutoCAD?
• What is the name given to the panel that allows users to store and view their projects and files in Fusion 360?
• What is created from a base view or another selected view?
• How do you create a circle in AutoCAD?
• What does creating a Thread on a bolt or screw allow for?
• What type of modification does the Press Pull tool perform?
• What is the primary purpose of the Measure tool in design software?
• Which feature would you use to analyze and display internal views of an object?
• Which workspace is used to create 2D drawings derived from models created in the Design workspace?
• What is the name of the tool used to place images on selected planar faces or planes?
• What does the command "MIRROR" do in AutoCAD?
• What is the effect of the "TRIM" command in AutoCAD?
• How do you apply a hatch pattern in AutoCAD?
• What command is used to align objects with one another in AutoCAD?
• What does the "EXPLODE" command do in AutoCAD?
• What does a layout in AutoCAD represent?
• Which command is used to eliminate unnecessary lines from a sketch?
• Which command would you use to create a circle in AutoCAD?
• Which view is selected to generate additional views such as projected or detail views?
• Which of the following tools is primarily used to add complex or simple features to assemblies?
• What does the Scale ratio represent in engineering drawings?
• What term describes a component that houses the elements of a design?
• What is the primary role of a Split Body tool in CAD applications?
• What command is used to add length to lines in a sketch?
• How can you save an AutoCAD drawing in a different file format?
• What is the function of the "HATCH" command in AutoCAD?
• What is the purpose of the Principal Work Plane(s) in sketching?
• What is the purpose of an Engineering Drawing?
• What is the primary purpose of the "OFFSET" command?
• Which feature adds to a sketch by using outlines from an existing sketch?
• In AutoCAD, which command would you use to create circular objects?
• What command allows you to view properties of an object in AutoCAD?
• How do you remove a dimension style from an object in AutoCAD?
• What is a key characteristic of an isometric view in design?
• How do you set up a page for plotting in AutoCAD?
• Which component of CAD systems represents a structural limitation on motion?
• What is the term for a starting point for a sketch on the XY, XZ, or YZ axes?
• How can you create a new dimension style in AutoCAD?
• In Fusion 360, which file is typically unnamed at the start of a new design session?
• What is the purpose of a Timeline in design software?
• What is the function of Motion Studies in design software?
• What serves as a visual representation of a project's spatial arrangements in Fusion 360?
• What is the purpose of the Revolve feature in 3D modeling?
• Which tool allows a drawing to rotate based on a specific rotation point?
• What term describes the component that is currently active in a design file?
• Which tool is used to change the position of an object by selecting the desired position on another object?
• What is the purpose of 'As-Built Joint' in the context of design?
• What are the pieces of text that provide information on parts within an assembly called?